-
Aerosol Generator-Cold Type BAG-6D
Introduction: The enclosure of BAG-6D aerosol generator is made of stainless steel, the regulating valve and the transfer valve are also made of stainless steel, and the pressure gauge is an oil-filled anti-seismic pressure gauge. The device is the lastest aerosol generator with built-in Oil-less Air Compressor, no need connect external air supply (also can be connected to an external air supply). The PAO or DOP is atomized through 2pcs or 6pcs Laskin Nozzles and generate high concentration aerosol.
Send Email Details -
Aerosol Generator-Cold Type BAG-4B
Introduction Aerosol Generator can generate aerosol of 10~100ugL with 50cfm to 8100cfm Air Flow. Aerosol Generator and photometer are used for integrity testing or leak testing in HEPA systems. Filter manufacturers use the device to scan ULPA and HEPA to validate their products. The filter detector uses the device to verify the filter has not been damaged in transit and that it has been properly installed without any leaks. Aerosol Generator is with rugged stainless steel structure, big filling port, independent spray-head and pressure control, and normative and clean joint output. It is a small, light and rugged portable, self-contained Laskin-Nozzle aerosol generator. All that needed is provide clean, compressed air to produce various diameters particles. Aerosol Generator has 7 Laskin Nozzles, it's diluted into 810 CFM under pressure 20PSI, the concentration is approx 100 ug/L per liter. Three valves allow the device to operate between 1 and 7 nozzles, providing a wide range of particle concentrations.
Send Email Details
